A Century Long Story !

Getting to cross nation­al bor­ders has always been one of our goals, which has cer­tainly brought us to Warsaw and many oth­er parts of the world. But Bini Clima has a his­tory that starts from afar, not so much geo­graph­ic­ally, as in time.

It was 1919 and our com­pany had just been foun­ded deal­ing mainly with the pro­duc­tion of hot air gen­er­at­ors, which were destined, in par­tic­u­lar, to factor­ies and churches.

The world of air con­di­tion­ing as we know it today was not yet born, and we will have to wait until the sev­en­ties to begin to notice a change from this point of view.

In 1977 the Bini Clima will start the pro­duc­tion and install­a­tion of the first air con­di­tion­ers and con­vectors that will be destined to many dif­fer­ent real­it­ies, from offices, to schools, to hos­pit­als and hotels.

Slowly we have conquered an ever lar­ger ter­rit­ory, even arriv­ing in Warsaw, and we do not want to stop here. In fact, we con­tin­ue to carry out our work with the same pas­sion and desire to innov­ate that anim­ate us since our found­a­tion.


Innovation and Sustainability

Our fan coils are cer­tainly also suit­able for the ter­rit­ory of Warsaw, which is char­ac­ter­ized by a very spe­cial cli­mate.

In Warsaw you can find very cold win­ters, and also springs in which it can con­tin­ue to snow, while in the sum­mer, rain can be present.

This may require fan coils that are able to sta­bil­ize the tem­per­at­ure of homes, offices and hotels, and we at Bini Clima can offer these types of solu­tions.

In par­tic­u­lar, we take care of cre­at­ing fan coils that trans­form water into the air to offer an ideal cli­mate in every sea­son.

We can design, pro­duce and com­mer­cial­ize many types of con­vectors and air con­di­tion­ers, start­ing from water ter­min­al hydron­ic units. These include fan coils both stand­ard and com­pletely cus­tom­iz­able to be able to always adapt to the needs of our cus­tom­ers.

Inside our cata­log you can find the fan coils under floor, fan coils with floor cov­er­ing, ceil­ing fan coils and many oth­er pro­pos­als that are always ded­ic­ated to air con­di­tion­ing.

In addi­tion, each of our products focuses not only on tem­per­at­ure, but also on max­im­um air health and on min­im­iz­ing the noise that could res­ult from the use of con­vectors and air con­di­tion­ers.

We are lov­ers of cus­tom­iz­a­tion and ori­gin­al­ity, and thanks to our ambi­tion you can also choose cas­settes with innov­at­ive design that will ensure an optim­al dis­tri­bu­tion of air in the envir­on­ment. Fan coils and /​ or double-walled fan heat­ers ideal for install­a­tions in false ceil­ing, fan coils double wall with high flex­ib­il­ity of use and many oth­er pro­pos­als for any type of envir­on­ment, domest­ic or pro­fes­sion­al.


Evolution and Modernity

The city of Warsaw has under­gone many peri­ods of great change, which is pre­cisely why the Pol­ish have learned to “pur­sue” evol­u­tion and mod­ern­ity.

From this point of view, they have in com­mon with us of Bini Clima an essen­tial ele­ment, con­sist­ing of the search for innov­at­ive solu­tions to always get to ensure the best com­fort for those who use our fan coils.

Thanks to con­tinu­ous research we have been able to design air con­di­tion­ers that, today, offer the highest level of per­form­ance while remain­ing silent, and that can also min­im­ize the use of elec­tri­city, thus help­ing the envir­on­ment twice.

We have, in our his­tory, decided not to remain anchored to the past, but to treas­ure our exper­i­ence to always bring new solu­tions and get ready.

We argue that only a mod­ern­iz­a­tion can help to cre­ate products that will always be excel­lent, func­tion­al and that will also be able to lend a hand to new gen­er­a­tions without pol­lut­ing.

Quality, First Of All!

Getting to places like Warsaw was not easy, but we did it thanks to our love for qual­ity and excel­lence.

This is why Bini Clima air-based fan coils and water-based fan coils are made using the highest qual­ity com­pon­ents that allow each of our cre­ations to be essen­tially, time­less.

In order to guar­an­tee a high qual­ity level, we sub­mit all our pro­duc­tions to very strict and pre­cise tests, which are car­ried out both inside our fact­ory and with­in the labor­at­or­ies that col­lab­or­ate with us, even at an inter­na­tion­al level.

In addi­tion to check­ing that an air con­di­tion­er is able to achieve optim­um tem­per­at­ure, and to adapt to the needs of those who com­mis­sioned it, we also eval­u­ate the noise that could be pro­duced by this.

In par­tic­u­lar, we are aware of how noise pol­lu­tion is present all over the world, and espe­cially in large cit­ies as Warsaw.

This is why we do not want to con­trib­ute to the dis­turb­ance already caused by cars, elec­tron­ic devices and gen­er­al rude­ness!

Our air con­di­tion­ers, there­fore, are silent and dis­creet, and all fam­il­ies, and even pro­fes­sion­al real­it­ies, will be able to install one without fear of this type of prob­lem.


In the same way, we are aware of the need to reg­u­late con­sump­tion, above all to allow every­one to install a state-of-the-art air con­di­tion­ing sys­tem. In fact, this should not be a priv­ilege for the few, and we want to work for the com­munity. There­fore, we also check that every con­vector and air con­di­tion­er does not use too much elec­tri­city dur­ing its use.

Finally, just to demon­strate how much we care about qual­ity, we con­tinu­ously update also in rela­tion to the pro­vi­sions of the law. We have obtained all the neces­sary cer­ti­fic­a­tions both from the point of view of the products and the rela­tion­ship with our work­ers, adapt­ing ourselves to what is now required at the level not only nation­al but also inter­na­tion­al.

A Complete Service

If you live in Warsaw you may think you do not have access to a com­plete ser­vice offered by Bini Clima. In this case you are wrong, because we really want to offer com­plete assist­ance to our cus­tom­ers in Warsaw at every stage.

We start with the col­lab­or­a­tion with the cus­tom­er in the design phase of the con­vectors and air con­di­tion­ers. In this import­ant step we take care to listen care­fully to the cus­tom­er and to com­ply with his par­tic­u­lar requests from dif­fer­ent points of view.

Sub­sequently, we move on to the pro­duc­tion of the fan coils and, even­tu­ally, to their deliv­ery. At this point, many com­pan­ies would leave the cus­tom­er alone, but we do not! We offer com­plete after-sales assist­ance in Warsaw, ran­ging from the eval­u­ation of the spaces in which the device will be installed, to the help in its pos­i­tion­ing.

Finally, every cus­tom­er knows that we can also con­tact us for the sup­ply of spare parts and also for simple advice and sug­ges­tions.

These ele­ments make us, there­fore, dif­fer­ent from any oth­er com­pany in the fan coils sec­tor.


The Factory: an area of over 13,000 square yards!

Production Line Robot Rainer
Epoxy Painting Oven
Production Line Robot Trumpf Trumatic
Assembly Production Line
Production Line Robot Finn Power

Although we can oper­ate all over the world, includ­ing Warsaw, we have our pro­duc­tion facil­ity here in Italy. This extends for about elev­en thou­sand square meters and includes all the depart­ments neces­sary to get to real­ize and test our fan coils.

The plant, there­fore, includes the depart­ment ded­ic­ated to sheet met­al pro­cessing, the epoxy powder coat­ing depart­ment, the unit assembly area and the con­trol labor­at­ory and for the final tests.

We are very proud of our pro­duc­tion real­ity, and we take care of it every day.

Our References

Hotels, Offices, Airports, Residential Buildings, …All Around The World !

Our ref­er­ences speak for us, and allow us to present ourselves head-on in areas such as Warsaw.

In par­tic­u­lar, in these years we have been involved in installing more than one mil­lion hydron­ic units and the most dis­par­ate con­texts: from banks, to museums, from uni­ver­sit­ies, to hos­pit­als. We are present with our work all over the world, from Lon­don, to Par­is, to Hong Kong.

One of the works that has most occu­pied us has been the install­a­tion of more than 14,000 fan coils inside the com­plex of the Dubai Island Apart­ments, to which was added the install­a­tion of more than two thou­sand fan coils inside the new ter­min­al of the Domode­dovo air­port in Moscow.

As you can under­stand, we nev­er stop, and we always look for new chal­lenges in our work, even at the inter­na­tion­al level.

Our Values

Our com­pany is sol­id also thanks to the pres­ence, in our DNA, of val­ues ​​that have allowed us to arrive until today and to reach ter­rit­or­ies like Warsaw.

In our daily work we rely a lot on hon­esty, one of the val­ues ​​that best rep­res­ents us. We want to have a sin­cere and sin­cere rela­tion­ship with our cus­tom­ers and also with those who work with us on a pro­fes­sion­al level.

We always hope that people have a good memory of our busi­ness, but to do so we must work hard, not just aim­ing at the sterile gain, but at cre­at­ing rela­tion­ships that can last over time, as well as our products.

We are also con­vinced that the drive to arrive until today has come from our pas­sion for com­par­is­on. A com­par­is­on that takes place both with cus­tom­ers, and with requests com­ing from it, and with com­pet­it­ors.

Pre­cisely in the rela­tion­ship with these “act­ors” we have the oppor­tun­ity to learn some­thing new every day and to act on the points that may require inter­ven­tions to become more and more per­fect.

If you are, there­fore, in Warsaw or in anoth­er ter­rit­ory in Poland, and you would like to have an ideal cli­mate in every sea­son, please con­tact us!